Return to site

Repairing Disk Errors Windows 8

broken image


Insert the installation DVD or USB and boot Windows 8 from it. In the Windows setup page select the language to install, Time and currency format and the keyboard or input method and click on next. Click on Repair your computer and select Troubleshoot. Click on Advanced options and select Automatic Repair and select the operating system. If Automatic Repair fails and you cannot even get into Safe Mode, then most probably there are some errors or missing files on your hard disk that prevent Windows 8 or 8.1 from starting correctly.Bootable installation media (DVD or USB) or Recovery Drive/System Repair Disc are helpful in such cases. This is a two-page article - page 2 covers Refresh your PC, Reset your PC and restoring a. Jul 22, 2020. Dec 14, 2013.

  1. Repairing Disk Errors Windows 10
  2. Repairing Disk Errors Loop Windows 8
  3. Repairing Disk Errors Windows 10 Loop
-->

Original product version: Windows 10, version 1809 and later versions, Windows Server 2012 R2, Windows 7 Service Pack 1, Windows Server 2008 R2 Service Pack 1
Original KB number: 947821

Symptom

Windows updates and service packs may fail to install if there are corruption errors. For example, an update might not install if a system file is damaged. The DISM or System Update Readiness tool may help you to fix some Windows corruption errors.

This article is intended for Support agents and IT professionals. If you are home users and looking for more information about fixing Windows update errors, see Fix Windows Update errors.

Resolution for Windows 10 and Windows Server 2012 R2

To resolve this problem, use the inbox Deployment Image Servicing and Management (DISM) tool. Then, install the Windows update or service pack again.

  1. Open an elevated command prompt. To do this, swipe in from the right edge of the screen, and then tap Search. Or, if you are using a mouse, point to the lower-right corner of the screen, and then select Search. Type Command Prompt in the Search box, right-select Command Prompt, and then select Run as administrator. If you are prompted for an administrator password or for a confirmation, type the password, or select Allow.

  2. Type the following command, and then press Enter. It may take several minutes for the command operation to be completed.

    Important

    When you run this command, DISM uses Windows Update to provide the files that are required to fix corruptions. However, if your Windows Update client is already broken, use a running Windows installation as the repair source, or use a Windows side-by-side folder from a network share or from a removable media, such as the Windows DVD, as the source of the files. To do this, run the following command instead:

    Note

    Replace the C:RepairSourceWindows placeholder with the location of your repair source. For more information about using the DISM tool to repair Windows, reference Repair a Windows Image.

  3. Type the sfc /scannow command and press Enter. It may take several minutes for the command operation to be completed.

  4. Close the command prompt, and then run Windows Update again.

DISM creates a log file (%windir%/Logs/CBS/CBS.log) that captures any issues that the tool found or fixed. %windir% is the folder in which Windows is installed. For example, the %windir% folder is C:Windows.

Resolution for Windows 7 Service Pack 1 (SP1) and Windows Server 2008 R2 SP1

To resolve this problem, use the System Update Readiness tool. Then, install the Windows update or service pack again.

  1. Download the System Update Readiness tool.

    select the download link in the following table that corresponds to the version of Windows that is running on your computer. For more information about how to find the version of Windows that you installed, see Find out if your computer is running the 32-bit or 64-bit version of Windows.

    Note

    This tool is updated regularly, we recommend that you always download the latest version. This tool is not available in every supported language. Check the link below to see if it is available in your language.

    Operating systemDownload link
    x86-based (32-bit) versions of Windows 7 SP1
    Download the package now.
    x64-based (64-bit) versions of Windows 7 SP1
    Download the package now.
    x64-based (64-bit) versions of Windows Server 2008 R2 SP1
    Download the package now.
    Itanium-based versions of Windows Server 2008 R2 SP1
    Download the package now.
  2. Install and run the tool.

    1. Select Download on the Download Center webpage, then do one of the following:

      • To install the tool immediately, select Open or Run, and then follow the instructions on your screen.
      • To install the tool later, select Save, and then download the installation file to your computer. When you're ready to install the tool, double-select the file.
    2. In the Windows Update Standalone Installer dialog box, select Yes.

  3. When the tool is being installed, it automatically runs. Although it typically takes less than 15 minutes to run, it might take much longer on some computers. Even if the progress bar seems to stop, the scan is still running, so don't select Cancel.

  4. When you see Installation complete, select Close.

  5. Reinstall the update or service pack you were trying to install previously.

To manually fix corruption errors that the tool detects but can't be fixed, see How to fix errors that are found in the CheckSUR log file.

Resolution - Download the package from Microsoft Update Catalog directly

You can also try to directly download the update package from Microsoft Update Catalog, and then install the update package manually.

For example, you may have problems when you try to install updates from Windows Update. In this situation, you can download the update package and try to install the update manually. To do this, follow these steps:

  1. Open Microsoft Update Catalog in Internet Explorer.

  2. In the search box, input the update number that you want to download. In this example, input 3006137. Then, select Search.

  3. Find the update that applies to your operating system appropriately in the search results, and then select Add to add the update to your basket.

  4. Select view basket to open your basket.

  5. Silverfast ai studio 8 crack mac. Select Download to download the update in your basket.

  6. Select Browse to choose a location for the update you are downloading, and then select Continue.

  7. Select Close after the download process is done. Then, you can find a folder that contains the update package in the location that you specified.

  8. Open the folder, and then double-select the update package to install the update.

If the Windows update or service pack installed successfully, you are finished. If the problem is not fixed, or if System Update Readiness Tool cannot find the cause, contact us for more help.

Description of the common corruption errors

The following table lists the possible error code with Windows Update for your reference:

CodeErrorDescription
0x80070002ERROR_FILE_NOT_FOUNDThe system cannot find the file specified.
0x8007000DERROR_INVALID_DATAThe data is invalid.
0x800F081FCBS_E_SOURCE_MISSINGThe source for the package or file not found.
0x80073712ERROR_SXS_COMPONENT_STORE_CORRUPTThe component store is in an inconsistent state.
0x800736CCERROR_SXS_FILE_HASH_MISMATCHA component's file does not match the verification information present in the component manifest.
0x800705B9ERROR_XML_PARSE_ERRORUnable to parse the requested XML data.
0x80070246ERROR_ILLEGAL_CHARACTERAn invalid character was encountered.
0x8007370DERROR_SXS_IDENTITY_PARSE_ERRORAn identity string is malformed.
0x8007370BERROR_SXS_INVALID_IDENTITY_ATTRIBUTE_NAMEThe name of an attribute in an identity is not within the valid range.
0x8007370AERROR_SXS_INVALID_IDENTITY_ATTRIBUTE_VALUEThe value of an attribute in an identity is not within the valid range.
0x80070057ERROR_INVALID_PARAMETERThe parameter is incorrect.
0x800B0100TRUST_E_NOSIGNATURENo signature was present in the subject.
0x80092003CRYPT_E_FILE_ERRORAn error occurred while Windows Update reads or writes to a file.
0x800B0101CERT_E_EXPIREDA required certificate is not within its validity period when verifying against the current system clock or the time stamp in the signed file.
0x8007371BERROR_SXS_TRANSACTION_CLOSURE_INCOMPLETEOne or more required members of the transaction are not present.
0x80070490ERROR_NOT_FOUNDWindows could not search for new updates.
0x800f0984PSFX_E_MATCHING_BINARY_MISSINGMatching component directory exist but binary missing
0x800f0986PSFX_E_APPLY_FORWARD_DELTA_FAILEDApplying forward delta failed
0x800f0982PSFX_E_MATCHING_COMPONENT_NOT_FOUNDCan't identify matching component for hydration

What does the System Update Readiness tool do

Verify the integrity of resources

The System Update Readiness tool verifies the integrity of the following resources: https://torrent-filter.mystrikingly.com/blog/permute-mac-os.

Repairing disk errors windows 8 laptop
  • Files that are located in the following directories:
    • %SYSTEMROOT%ServicingPackages
    • %SYSTEMROOT%WinSxSManifests
  • Registry data that is located under the following registry subkeys:
    • HKEY_LOCAL_MACHINEComponents
    • HKEY_LOCAL_MACHINESchema
    • HKEY_LOCAL_MACHINESoftwareMicrosoftWindowsCurrentVersionComponent Based Servicing

This list may be updated at any time.

When the System Update Readiness tool detects incorrect manifests, Cabinets, or registry data, it may replace the incorrect data with a corrected version.

Logging

The System Update Readiness tool creates a log file that captures any issues that the tool found or fixed. The log file is located here:

  • %SYSTEMROOT%LogsCBSCheckSUR.log
  • %SYSTEMROOT%LogsCBSCheckSUR.persist.log

How to fix errors that are found in the CheckSUR log file

To manually fix corruption errors that the System Update Readiness tool detects but can't fix, follow these steps:

  1. Open %SYSTEMROOT%LogsCBSCheckSUR.log.

    Note

    %SYSTEMROOT% is an environment variable that saves the folder in which Windows is installed. For example, generally the %SYSTEMROOT% folder is C:Windows.

  2. Identify the packages that the tool can't fix. For example, you may find the following in the log file:

    Summary:

    Seconds executed: 264
    Found 3 errors
    CBS MUM Missing Total Count: 3
    Unavailable repair files:

    servicingpackagesPackage_for_KB958690_sc_0~31bf3856ad364e35~amd64~~6.0.1.6.mum
    .

    In this case, the package that is corrupted is KB958690.

  3. Download the package from Microsoft Download Center or Microsoft Update Catalog.

  4. Copy the package (.msu) to the %SYSTEMROOT%CheckSURpackages directory. By default, this directory doesn't exist and you need to create the directory.

  5. Rerun the System Update Readiness tool.

If you are a technical professional, see How to fix errors found in the CheckSUR.log for a more option on fixing errors in the CheckSUR.log.

Quick Navigation:

The problem: 'Repairing disk errors' Windows 10 loop

No matter which brand of computer you are using, problems may occur unexpectedly. Some users encounter 'Repairing disk errors' on Windows 10 HP computer. The same problem is reported on Lenovo, Dell and ASUS computer as well. 'Repairing disk errors' loop happens after upgrading to Windows 10, or after a game crash, etc. One user posted his experience in the forum:

'I have had to use a USB with Windows 10 on it to boot my laptop. I have now been stuck on 'repairing disk errors' nearly all day. Is there any way I can get off this screen without damaging my laptop?'

How to fix 'Repairing disk errors' loop in Windows 10/8/7 simply?

If you are troubled with 'Repairing disk errors' loop, there are three quick fixes for your reference:

Fix 1: Restart from Safe Mode with Networking

1. Hold Shift key and press Power button until the 'Sign-in' screen shows up and click Restart.

2. After your computer restarts to 'Choose an option' screen, choose Troubleshoot > Advanced options > Startup Settings > Restart.

3. After the computer restarts, you'll see a list of options. Press 5 or F5 key to start computer from Safe Mode with Networking.

Fix 2: Run automatic repair/startup repair

1. Insert Windows installation media, shut down your computer and restart it.

2. When the manufacturer's logo pops up, keep pressing the Boot menu option key (usually F12) to enter the boot menu. Use or key to choose to boot from the installation media.

3. When getting a prompt of 'Press any key to boot from CD or DVD', just press any key.

4. Choose the correct time and keyboard type and click Next. https://torrent-hongkong.mystrikingly.com/blog/can-windows-edition-minecraft-play-with-java.

5. In the next screen, choose Repair your computer.

6. Select Troubleshooting > Advanced option > Automatic Repair/Startup Repair successively. Wait for the automatic repair to complete.

Fix 3: Perform system restore from boot

1. Insert Windows installation media and boot from it as mentioned in Fix 1.

2. On the Install Windows screen, select Repair your computer.

3. Select Troubleshoot > Advanced option > System Restore in order. Follow the System Restore wizard to finish the recovery process.

Note: To perform system restore, you should have created system restore points before.

More efficient way to fix various boot errors

As you see, you may need Windows installation media to fix 'Repairing disk errors' loop. What if you don't have the installation media? AOMEI Backupper Standard can rescue you from this situation. It allows you to create bootable media to start your computer when it can't boot normally. Also it enables you to make different types of backup including system backup, disk backup, file backup, etc.

To get prepared for various boot errors, you can create a bootable drive and backup the system regularly with AOMEI Backupper. Thus, you can restore system easily from the bootable USB when serious problems occur. Just download AOMEI Backupper and follow the instructions thereinafter:

Download Freeware

Win 10/8.1/8/7/XP

Secure Download

✦ Create a bootable USB

Step 1. Install and launch AOMEI Backupper. Connect a USB drive to your computer. Click 'Tools' and select 'Create Bootable Media'.

Repairing Disk Errors Windows 10

Step 2. In the pop-up window, choose bootable disc type and click 'Next'. It is recommended to choose Windows PE so that you can access full functions of AOMEI Backupper.

Step 3. In the next window, select boot mode, tick 'Download WinPE creating environment from the internet' and click 'Next'.

Tips: If your system is UEFI boot mode (i.e. your system is installed on a GPT disk), you can select 'Create UEFI bootable disc'; if your system is Legacy BIOS boot mode (i.e. your system is installed on an MBR disk), you should select 'Create legacy bootable disc'.

Step 4. Select 'USB Boot Device' and click 'Next'. You will receive a prompt to format your USB drive. Click 'Yes' to start creating bootable media.

✦ Perform a scheduled system backup Transfer video from android to ipad without computer.

Step 1. Launch AOMEI Backupper. Click on 'Backup' and select 'System Backup'.

Step 2. The required system partition(s) is (are) selected by default. Choose the destination path to store the backup files. You can save the system image to the local disk, external hard drive or network location.

Step 3. Tick 'Schedule' in the bottom, and then set the frequency of the system backup to run.

Step 4. Confirm the operation and click 'Start Backup'.

Repairing Disk Errors Loop Windows 8

>> Options: you can enable email notification, choose the compression level for the backup image file and select intelligent sector backup or sector-by-sector backup.
>> Scheme: it will delete old image files automatically to save disk space for you. You need to upgrade to AOMEI Backupper Professional to enjoy this feature.

Wrapping things up

Repairing Disk Errors Windows 10 Loop

There are three quick fixes offered in this article to help you resolve 'Repairing disk errors' loop in Windows 10/8/7. It is suggested that you create a bootable drive and backup system with AOMEI Backupper so that you can easily fix boot errors in the future. What's more, AOMEI Backupper owns the clone feature which can help you with replacing C drive with SSD. Go for AOMEI Backupper and explore all the wonderful features by yourself!





broken image